0
answer
pump pedal 1 2 3 4 to the floor hold,other person open screw on slave cylinder tssssit close screw then release pedal very slowly motion up,make sure reservoir wil not come empty,repeat repeat repeat in exercise motion verry well,until no more tssssit tssssit and it will be solid fluid ,gain
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you get a hydraulic clutch on a 1986 C1500 working?
try to bleed the clutch
How do you adjust the clutch on a 1997 Subaru?
It probably has a hydraulic clutch so you will have to bleed the air out of it.
How can you bleed the hydraulic clutch on my 88 bronco 2?
Dumdassesssssssssssss!
How do you bleed a hydraulic clutch system on a gmc sierra?
shhould be da same way u bleed your break system... bleed valve on clutch master cylinder...
How do you bleed hydraulic clutch 92 rodeo?
pray like hell
How do you bleed a hydraulic clutch on an Audi 4000?
The rubber gasket failure.
How can you bleed a Rover 400 1998 hydraulic clutch?
The Hydraulic clutch fitted to the rover 400 is a sealed unit and the only thing that you can do is to replace the complete unit
How do you bleed a clutch on opel astra gtc?
Follow the clutch hydraulic line down to the bell housing. Note where the hydraulic line goes into the bell housing and if there is no bleed valve there you may need to remove a cover. Have a friend/assistant step on the clutch while you open the bleed valve. Close the valve and have the friend let up on the clutch. Do that a few times (making certain that the hydraulic fluid remains full) and you're done.
How do you bleed the hydraulic clutch on 1996 Toyota tacoma 4x4?
figured it out. thanks anyways.
How do you bleed a clutch on a 1983 Chevy s-10?
As i believe, from experience of owning one, 1984 is when the hydraulic clutch came into place. You shouldn't need to bleed the clutch on an 83' S10. Not unless its not the stock transmission.
How to adjust F350 Hydraulic Clutch?
Hyd clutch has no adjustment, pump clutch pedal hold down bleed off hydraulic slave cylinder on driver side of trans. If won't bleed replace if bleeds off no air in line & still not better ck bushings on clutch pedal under dash. Hope this helps
Whats is the best way to bleed a hydraulic zx11 clutch?
use a one man bleeder
