4 Wheel Disc? Make sure master cylinder is ful at all times Start at longest line and work towards shortest Open bleeder screw at top of caliper Fluid should start to flow due to gravity - when fluid is flowing have assistant step on brake pedal approx. 2/3 down and hold Tighten bleeder screw move to next wheel and repeat
how do i bleed brakes on a 2003 hyunia xg350
Our 2003 Impala has brake pads.
The same way you bleed brakes on a newer car, bleeder valves are in back of the wheel cylinders on the backing plate.
Watch how you take them off and put them back on the same way. Then you have to bleed them since there drum brakes
http://www.innerbean.com/housecor/bleed_brakes.html
To bleed the brakes on a 2002 impala, have a helper pump the brake pedal then hold it down. Open the bleeder valve at one wheel, and let air and fluid flow until the pedal goes to the floor. Close the valve and repeat. When there is no air in the fluid, then move to the next wheel and repeat.
You bleed the brakes just like you bleed any other cars brakes, there is no special way to bleed anti-lock brakes.
for best results use OE (dealer parts)
If you have to ask how to bleed brakes, do not do it yourself.
Having ABS does not change how you bleed the brakes. Bleed them as you would if it did not have ABS.
you change the brakes,check brakes fluid,bleed the brakes why is hard to stop in a 1988 sliverado?
How do you bleed master