It has the special bleeding bolt in the bottom part of the radiator, when you are facing the car it should in right bottom corner of the radiator. It also has one bleeding bolt on the engine facing radiator (just behind the exhaust manifold) You are suppose to loosen it when you are doing full flush. Torque 25 N*m
To bleed the coolant system on a 1998 VW Beetle, remove the top from the overflow tank. Run the car for 10 to 15 minutes to force any air out of the system, then check the coolant level. Add coolant as needed.
Start by taking the top off of the coolant overflow reservoir. To bleed the system, run the 1998 VW 2.0 Beetle about 10 minutes, then check the coolant level. Add coolant if needed, then replace the reservoir top.
There is only valve to bleed coolant and not air. If you want to bleed air of the system, you need to park the car on incline of 10-15 degrees (front ahead) and run the engine for some time. It will work out all air.
You can use universal coolant which you can find in any auto parts store, or you can use a coolant for Japanese card, or you can go and get coolant at a local Toyota dealer.
need to bleed the lines
9.8 Quarts or 2.45 Gallons.
The radiator capacity for a 1998 Toyota Camry is two gallons. This includes coolant stored in the engine block and radiator.
Low coolant level, internal or external coolant leak or faulty thermostat.
The 1998 Avensis wiper motor relay is located in the exterior fuse box. The exterior fuse box is located underneath the hood.
take out the ashtray pop the front cover off the centre console by pulling it out from the bottom then unscrew the screws holding in the radio and unplug the iso connectors
1998 Toyota Camry takes red antifreeze. some take green and orange, depending on the year. was never given a name, just the color.
did u bleed the coolant system of air cuz that could be the reason