Have a helper pump the pedal several times then hold it down. Open the bleeder valve on the slave cylinder, til air stops coming out. Close the valve, have the helper release the pedal then repeat the process till air stops coming out.
bleed clutch Saturn vue 2003
there dry clutch's, run a cable. no fluid. .:. you can't bleed it. :)
how do I bleed the clutch system in a 2004 ford ranger
after the clutch master cylinder has been replaced.
do 2004 Nissan Altima 2.5have a bleeder plug
The clutch can't be adjusted. It is an hydraulic clutch. The clutch pedal sends pressure from the master cylinder to the slave cylinder on the clutch. IF you are having trouble with it the thing to do is bleed the air out at the slave cylinder. Have an assistant pump the clutch and hold it to the floor. Then open the bleed valve on the slave cylinder to let the air out of the system. On the final bleed hold the clutch to the floor and close the bleed valve on the slave cylinder. The clutch master cylinder operates of the brake fluid reservoir. Make sure you keep this full of brake fluid as you bleed the clutch.
To bleed a clutch on a Nissan Stanza, you need to find the bleed-off valve, usually somewhere near the slave cylinder.
shhould be da same way u bleed your break system... bleed valve on clutch master cylinder...
same way you bleed the brakes. push clutch all the way to the floor and release the bleed valve on the transmission. tighten it up, release the clutch. Need 2 people to do it.
try to bleed the clutch
pull out the transmission
how to bleed the clutch system on ford f-250 2001 truck