Right above the slave cylinder there is a bleeder screw. Just unsrew it and have someone hold in the clutch to start the bleed.
how to replace the slave cylinder on a 1993 jeep wrangler
no none of the answers were my question
You don't. You add it to the master cylinder and bleed the brakes.
The bleed valve is located on the drivers side of the bell housing.
Yes. However it is very tricky. Refer to saturnfans.com for a full procedure
Yes, I have a 1993 6 cylinder with abs...probably an option.
How to change a clutch and master cylinder on a 93 jeep wrangler
did you replace the master cylinder if so it has to be bleed frist
The Slave Cylinder and the Master Cylinder control totally different systems. The Slave has to do with the clutch, and the Master has to do with the brakes. They have nothing in common.
4.25 to 4.5 qts
Pump the pedal to the floor and then screw on the cylinder.
If you need to ask, I suggest taking it to a reputable shop. It is very involved & many things can go wrong. I definitely suggest changing at least the slave cylinder for the clutch while in there.