Follow the heater hoses to the firewall. There should be 2. disconect them from the heater core, then insert a 5/8 hose bib and clamp them together.
Yes
Easiest way is to connect the two heater hoses together.
its located on the heater core
The heater core is inside the hvac housing under the dash.
Just un hook the hose's from heater core and put a piece of pipe in them or something and hook them together.
No , if you were to bypass the heater core , you would have no heat
Take both heater hoses off at the heater and the hose running from the front, attach it to the rear of the engine.
Find the two hoses that go to the heater core, usually 3/4 in. hoses, and connect them. It's very simple.
join the inlet and outlet hoses together.
you would have to bypass the heater core first.
Remove the hoses from the heater core pipes and install a short piece of pipe in both those ends. Install hose clamps and it's bypassed.
Heater coolant bypass pipe It would be the return hose for the heater.