Want this question answered?
the number u are seeking is 0.639
Voltage does not have a waveform. The waveform is based upon the frequency of the voltage or current. A battery (any voltage) does not waveform, however the voltage coming into your house (US) has a frequency of 60 Hz. The length of the 60 hz waveformLength (in centimeters) = (3 x (10 ** 10))/ Frequency in hz =500 000 000 cm
Voltage and frequency are independent quantities.AnswerBecause the r.m.s. value is dependent on the shape of the waveform, not its frequency. The average value of any symmetrical waveform is zero and is independent of frequency.
rectangular
You don't. Transformers only work with AC voltage. Their input will be an AC waveform, and their output will be an AC waveform. Other electronics are used to convert the stepped down AC waveform from the transformer to DC.
Use an oscilloscope. That shows the voltage waveform and you can read the peak value.
60 seconds
no, dc volatage is a type of current direct current, ac is alternating current, average voltage could be any type of voltage ac or dc that maintains a constant rangeAnswerNo. A DC voltage is exactly equivalent to an AC rms-voltage. So, for example, 100 V (DC) is exactly equivalent to 100 V (AC rms). The average value of an AC waveform is zero.
Frequency.
It would be unity, or 1.0. Since the voltage in a DC circuit does not vary with time, there can be no phase displacement of the current waveform, and therefore the current could not lead or lag the voltage waveform.
There is such a thing as "RMS power", but it's not useful for anything, so don't use the term. No one measures the RMS of the power waveform. What they do is measure the RMS of a voltage waveform, and then use that to derive the averagepower. The correct term is "average power", not "RMS power". You could measure the RMS of the power waveform instead of the average, but your measurement would be 1.2 times too high.
A conventional voltmeter displays 0.707 of the peak voltage when it measures AC.In doing so, it displays the RMS value of the measured voltage IF the measured voltage is a sinusoid.If the measured voltage is not a sinusoid, then its peak value is 1.414 times the displayed number, andyou have to calculate the RMS based on the waveform.