Want this question answered?
condensate in the steam piping, probably due to improper slope of piping to allow condensate flow out.
Underfloor heating is used to help with controlling the temperature in the house with the convection heating method. If water get on the floor, the water will condensate into steam.
You have to consult tables which give the properties of water and steam (commonly called Steam Tables). You have to calculate the total enthalpy of the steam as delivered, and subtract the enthalpy of the returned condensate (if returned) or of the water as it enters the boiler. In modern steam tables this will be in kilojoules per kilogram. You can multiply by mass to get total energy. To convert to kilowatt-hours, note that 1 kWh = 3.6 MJ. Various organizations have published steam tables in the past. The one published by the International Association for the Properties of Water and Steam is the one to use, particularly the 1997 formulation for industrial application. There are some free caclulators online which claim compliance to the algorithms, but I can't vouch for any of them. It is not straightforward and you may want the services of a competent steam engineer (that leaves me out. I may be able to hack my way through, but I am not "qualified" in this area.)
Steam traps help out in a couple of ways: Where steam is being passed through a turbine, entrained liquid droplets could cause problems when the impact the blades of the turbine. Where steam is being used to heat something, the liquid has already lost the heat of vaporization, so it is not worth transporting for heating purposes.
one kilogram staem condensed what is weight
If the steam pressure is 25 bars the condensate pressure is at most 25 bars. Typically it is slightly less due to friction of the fluid passing through the steam traps. As the condensate approaches the condensate tank, where it is normally vented to atmosphere, the pressure decreases in the system to near atmospheric.
whenever steam is utilised as heating media, steam condensate is produced.This steam condensatecan be utilsed for steam generation at some other location and needs to be pumped, for pumping you need some intermediate storage of this condensate. For storing it we use condensate pot whose level can be controlled.
condensate,bleed line of all condensate
Condensate is what you get when you condense steam (water) that was heated in a boiler to make the steam. I'm not sure what else you are looking for.
condensate in the steam piping, probably due to improper slope of piping to allow condensate flow out.
whenever steam is utilised as heating media, steam condensate is produced.This steam condensatecan be utilsed for steam generation at some other location and needs to be pumped, for pumping you need some intermediate storage of this condensate. For storing it we use condensate pot whose level can be controlled.
whenever steam is utilised as heating media, steam condensate is produced.This steam condensatecan be utilsed for steam generation at some other location and needs to be pumped, for pumping you need some intermediate storage of this condensate. For storing it we use condensate pot whose level can be controlled.
1.000 at 60F.
A device that will allow cooler condensate to pass and hold back the higher temperature steam
One pound of steam condenses back to one pound of liquid water. Since one gallon of water weighs 8.337 pounds, simply divide the weight of the condensate by 8.337 to find out how many gallons of condensate you have.
Condensate production divided by (hydrocarbon) gas production. Conventional units stb/MMscf.
It works on the principle that condensate at a given temperature will flash to steam after pressure has been significantly reduced.