on the 1.6 HDI diesel engine, it's located under a black plastic housing on the right side about half way down. There's a big nut cast into the top of the housing that you undo (carefully) with a socket wrench. You will probably have to remove the top air intake hose to gain access to the housing. Once the housing is removed give the filter a sharp tug to remove it - it's not fixed by anything. Replace with a new filter and sealing washer.
Any type of oil will work in a berlingo can. There is not a specific type of oil a person needs to get for this van.
About 4.5 litres
You will need to remove the passenger side plastic wing plastic from inside the wheel arch. In front of you on the gearbox you will see a square drive plug. You need to remove this plug, fill the gear box with oil until the oil starts to drip out from the hole.
on a saxo vtr the oil filter is on the right hand side of the exhaust manifold it is a black cylinder and you cant miss it you dont need to change the cylinder just the filter element inside any Q e-mail me at dan_priest.com
Change the oil filter every time you change the oil.
To change the oil filter in a Citreon Berling 1.6 hdi first located the oil plug under the vehicle. Put a pan under the oil plug to catch any oil that will drip down. Unscrew the oil plug. Let the oil drip out. Then gently unwind the oil filter from it's position and remove. Screw a new oil filter in this position. Replace the oil plug on the bottom of the car. Now put the requirement amount of car back into the car. Once the new oil has been added the vehicle is ready to drive.
When you change the oil and oil filter.
. 850ml withou filter and 950 with oil filter change
Open the oil Vaulve
Change the oil filter every time you change the oil.
Drain then change the filter.
Yes , you can change the filter only and either prefill the oil filter OR top up the engine oil , but if you have already started the engine the " dirty " oil has mixed with the new oil