To change Volvo oil filled 940 engine mount, push a container under the oil drain plug. Unscrew drain unplug and remove the cap from the oil filler hole at the top of the engine. Unscrew oil filter to drain. Then change oil.
A Volvo breakaway engine mount is designed to break and release the engine in a downward rear direction. This help avoid any interference with the driver's compartment in the event of a frontal impact. This is all part of the crumple zone design to absorb and distribute impact forces.
If the engine mount is in the way it's either broken (engine sagging on passenger side) or the filter is bigger than stock size. The filter should be accessible from the back, underneath the car, just behind the mount. Be careful not to break the wire off the oil pressure sender.
how to change a motor mount on a kia optima
It could be your engine mount or you might need an alignment.
nope
YES, IT COULD BE BROKEN.
Loosen the engine mount retaining bolt. Jack up your 2000 Monte Carlo engine. Remove the engine retaining bolt and the engine mount bushing. Put the new engine mount bushing in and reverse the process.
20min.
Ive a Volvo v40 diesel 1.9 [Renault engine] could you tell me when the cambelt needs changing?
You can feel the engine running inside the car not necessarily vibration but it can cause vibration but for sure you can feel the engine running at your foot.
Volvo buses will have Volvo Penta engines in them.