Follow the top rad. hose to the engine. It's in there. Drain the rad first. When refilling the rad. fill almost to the top, and before starting the engine losen one of the heater hoses at the fire wall, then start engine with the heater in the car on full, check fluid and fill and slowly losen the heater hose to bleed the system of air. Check the fluid level and heat when engine reaches operating temp. if good, job is done. If still a little cool inside the car, then bleed a little more and check and fill the rad.
Yes
A 1993 Ford Crown Victoria came from the factory with ( 5W-30 )
there are two i have a 1993 crown vic lx and i have two
In a 1993 Ford Crown Victoria : ( 2 valves per engine cylinder , total of 16 valves )
5/w20 ========================================================= For a ( 1993 ) Ford Crown Victoria ( 5W-30 is the PREFERRED oil ) 2001 and newer Ford Crown Victoria Owner Guides show to use 5W-20
In the fuel tank.
No, the 1983 - 1992 Crown Victorias used the AOD transmission and the 1993-1994 Crown Victorias used the AODE transmission, so they would be different. Sorry!
32 to 34 psi
it is on a transmission housing
What year ? 1993
The oil sending unit on 1993 crown victory is located right under the oil filter.
AnswerThis is the application for the Crown Victoria 1983-1992=AOD, 1993-1994=AODE, 1995-2006=4R70W and 2007-2009=4R75E