Want this question answered?
What engine? and ensure it is a bad gasket, not an intake plentum.
They didn't make and Si in 1998. The PCV valve is on 1998 Civic SI's are located on the bottom of the intake manifold. It is acessed from the bottom of the car, you have to remove the oil filter to reach it.
yes it will fit but you will have to change the intake manifold to the 1998 style.
What are the intake manifold torque specs for a 1998 ford f-150 xlt
I had the same thing in my 1998 Honda Civic and it had to do with the intake manifold setup on the J spec motor. We replaced it with the original intake manifold off the stock motor that we were replacing (that was originally in the car) and the idle was fixed. You will want to clean your old intake manifold though so that you don't get a bunch of junk in your fuel injectors.
What are the intake manifold torque specs on 1998 Oldsmobile bravada?"
You need to take the intake manifold off and radiator
How do you change the starter on a 1998 Honda Civic ex?
it would be on the top of the moter
You will need the intake and exhaust manifold gaskets. I would also install new head bolts.
Passenger side of the intake manifold.Passenger side of the intake manifold.
The starter is located under the intake manifold and requires removal of the intake manifold to access it. Good luck!