After you remove the two screws in the back panel, the have to pull the assembly. The best way for me to describe it is, you have to move to the side of the truck and pull the assemble towards you. You cannot pull it straight back. There are two pins that allow the light cover to be secured against the back of the truck. One pin is towards the top, the other pin is towards the bottom. I used a screwdriver to GENTLY help me pop the pin inserts out.
How do you change the tail light on a 2001 toyota sequoia
how to change tail light bulb on Toyota sequoia
Don’t know
Had same trouble with my 04 Sequoia.. Flushed and change transmission fluid and had no more trouble..
Look in the trunk, there is cover for the brake light, remove and you will have access to change the bulb.
Vehicle stability control
Light housing twists from inside of trunk for access of bulbs.Toyo joe
it dont have to, change your brake shoes/pads every 30000 miles or whatever
2008 Toytoa Sequoia brake light bulb lamp replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Remove the tail light from the outside. Pulls out. Replace bulb. There is no access from the inside of the trunk.
what do you have to do to change the center brake light
Yes