open lift gate. remove 2 screws on top/side of lens assembly, then pry/pull the assembly out. brake /tail light should be #1157
yes it does
In a 2000 Eddie Bauer Ford Expedition, the computer module is located under the dashboard and to the left of the brake pedal. The module should be cream-colored.
look up by the brake pedal and its on a white box its up high use a flash light
Below and to the left of the steering wheel , by the brake pedal ( remove the panel cover to access the fuses ) according to the owners manual
Bent of misadjusted shift linkage?
Below and to the left of the steering wheel , by the brake pedal . Remove the panel cover to access the fuses ( according to the owners manual )
Open the rear door hatch. there are 2 or 3 Philip screws on top of the brake light housing. remove them , pull housing from the frame of the truck. change bad light bulb, reinstall everthing you just took out and your done.
In the 1988 Eddie Bauer version the proportioning valve is part of the brake's master cylinder. Follow the lead - I believe it's the same with the 1986'er...
I am looking for replacement seat cushioning covers/pads for my Eddie Bauer double stroller where can I purchase these. Thank you for your time to respond back.
It is located under the dashboard next to the shaft for the brake pedal. Put your head on the floorboard and look straight up.
The brake light switch is out of adjustment.
Put your head on the drivers side floorboard. Look straight up by the brake pedal and you will see a white box, this is your comp. module. Your code will be a large bold 5 digit number