The cam sensor is part of the distributor, the entire distributor needs changed. You can not get the cam sensor separately.
on top
What size engine.
It is on the front of the engine. It aims at the left cam sprocket through the timing cover.
Top of the engine on driver side of the valve cover and crank sensor is under the starter just move starter out of the way
P0340 Camshaft position sensor circuit P0340 (M) No Cam Signal At PCM No fuel sync.
Out the bottom, engine and trans at the samae time.
How do I change the spark plug wires in a 1997 dodge stratus? It seems that there are three plugs and wires that are easy to get to on the front of the engine, but the other three are somewhere behind the engine near the firewall. Thank you.
Code 54-No cam signal at the PCM-No camshaft position sensor signal detected during engine cranking.
install hp cylinderheads and change out the camshaft
Does the 1991 2.5 s10 have a timing chain or a belt or just mesh gears and how do you replace them The camshaft is gear driven off the crankshaft. The camshaft gear is pressed onto the camshaft. The camshaft must be removed from the engine to change the camshaft timing gear. The timing gears should last the life of the engine. Next time, please don't answer your question with another question.
It attaches to the timing chain cover on the front(pass side) of the engine. It is the three wire sensor above the serpentine belts.
With proper maintenance, the camshaft should last the life of the engine.