i would asume it is a 4.7 liter.the sensor is located in the passenger side head towards the front.sticks down from the bottom between the exhaust and the valve cover 13mm bolt?maybe 10mm its been a while pullit out make surte the o-ring is on it if not get it out before installing the new one.put a little oil on the oring push it in and bolt it down
It is inside the distributor.
The cam sensor is inside the distributor on a Dodge 5.2L.
It is the "pick-up" plate in the distributor.
No, pulling the transmission is not required.
Camshaft position sensor circuit malfunction.
The camshaft position sensor, which is located inside the distributor, is a pretty easy component to test on the 1992-1995 5.2L/5.9L Dodge Ram 1500/2500 pickup.
Timing is set by the PCM, there is no adjustment.
Inside distributor under rotor.
The cam sensor is under the front of the passenger side cylinder head.
It is inside the distributor. It is called a pick up plate.
The 2000 Chevrolet Silverado 1500 4 x 4 camshaft sensor can be found on the back of the engine head. The camshaft sensor will be labeled as such.
The cam sensor is the "pick up plate" in the distributor, under the rotor.