you need to remove the transmission then unbolt the clutch from the flywheel.
No
It probably needs a new clutch.
on driver side firewall,theirs a clutch master cylinder. use dot 3 brake fluid.
Yes
i have u aswer but i dont exactly.....
The oil pump on a 92 Chevy S10 is changed by draining the oil, unbolting the oil pan, and lower it from the vehicle. The pump can then be unbolted and a new one put in place.
We are going to need to know what engine you have in that 92 S10.
With great difficulty especially the 4+4 models.
passenger side of the tranny on mine there are two switches, the forward one is the reverse switch the other one is the speed sensor
You will need to change it out. The bearing is failing.
On the bottom right there is a slave cyl you take a ten mm wrench have someone pump the clutch hold it open the bleeder they will fill the pedal go down then tighten it repeat several times
There is not any adjustment on this clutch. Al you have to do is bleed the system.