0
How do you change a daytime running lamp bulb on a 2004 Chevrolet Suburban?
Wiki User
∙ 6y ago
First remove the 2 l rods to remove the headlight assembly then look down behind the marker and turn signal look for a push in clip near the fender just squeeze it and at the same time pull out on the lens . the light is in that lens closest to the grill.
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
How do you change an alternator on a 2003 Chevrolet suburban?
how do you change an alternator on a 2003 chevrolet suburban?
How do you replace the daytime running lamp on a 2008 gmc acadia?
How to change the daytime running lamp on 2008 GMC Acadia
What is the engine oil capacity of a Chevrolet Suburban?
Engine oil with filter change 6.0qts
How many quarts of oil does a 2003 Chevrolet Suburban need for oil change?
The 2003 Chevrolet suburban requires five quarts of oil in the motor. The oil filter should be filled with oil, when changing it.
How to Change cabin air filter on 1993 Chevrolet suburban?
A 93 model does not have a cabin filter. SORRY
Where is the fuel filter located on 2003 Chevy Suburban?
The 2003 Chevrolet Suburban fuel filter is located inside of the gas tank. You will to remove the gas tank in order to change the fuel filter.
How do you change daytime running light bulb in c5 corvette?
The daytime run lamps are your high beam bulbs with a module that cuts the amount of amperage that just dims the bulbs. Just change high beam bulb.
How do you change a daytime running lamp on a 2000 Chevrolet Suburban as it appears difficult to access the bulb?
open the hood, stare at the head light assy, the head lights are in place by two long pins in the top portion of the assy, twist and pull up on the latches, ta-da the head light assy will come out, reach in and replace that 1.99 bulp popeye! Consult the owners manual. It will tell you how to access the headlamp for replacment.
How do you change the fuel pump on a 1988 Chevrolet Suburban?
most likely you will have to drop the fuel tank because most fuel pumps are in the tank.
How often should you change a serpentine belt Chevrolet Suburban?
When you begin to see signs of excess wear, fraying, cracking, or other damage.
How do you change the Daytime Running Light bulb in a 2002 Suburban?
This is the method I used on my 2001 Suburban. It should work on similar suburban designs (2000-2006, but I have not verified that.)Open the hood, then remove the headlight. To remove the headlight, there are 2 "L" shaped brackets, one on the left, one on the right. Rotate them both toward the front of the car, then pick them straight up and the headlight will come out. Now, you have to fiddle with the daytime running light socket a bit. You have to twist it to the right and it will pop out. However, to twist it, there is a plastic piece on it you have to depress to get it out of the way of a 'stop' that protrudes from the daytime running light housing. Take out the old bulb, put in the new one, slide the bulb back in at the angle you took it out, then twist it back and it will snap in place. (The snap is the sound of that plastic piece hitting the gray 'stop'.) Put the headlight back in and you're done.9-6-08 I just used this method on my 2003 Suburban and it worked excellent. I changed both bulbs in under 10 minutes.
What would be wrong with the Daytime running light that don't work on 91 Plymouth acclaim Changed relay under fender checked fuses checked E brake?
If the headlight that runs through the modulator first is out then the daytime running lights won't work. Change the bulb and the daytime lights should then work.
