Headlights Tail and Brake Lights
Chevy Silverado
Chevy Suburban

How do you change the Daytime Running Light bulb in a 2002 Suburban?

161718

Top Answer
User Avatar
Wiki User
2018-04-27 02:55:22
2018-04-27 02:55:22

This is the method I used on my 2001 Suburban. It should work on similar suburban designs (2000-2006, but I have not verified that.)

Open the hood, then remove the headlight. To remove the headlight, there are 2 "L" shaped brackets, one on the left, one on the right. Rotate them both toward the front of the car, then pick them straight up and the headlight will come out. Now, you have to fiddle with the daytime running light socket a bit. You have to twist it to the right and it will pop out. However, to twist it, there is a plastic piece on it you have to depress to get it out of the way of a 'stop' that protrudes from the daytime running light housing. Take out the old bulb, put in the new one, slide the bulb back in at the angle you took it out, then twist it back and it will snap in place. (The snap is the sound of that plastic piece hitting the gray 'stop'.) Put the headlight back in and you're done.


9-6-08 I just used this method on my 2003 Suburban and it worked excellent. I changed both bulbs in under 10 minutes.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

To replace the daytime running light on a 2004 Suburban, you will have to first remove the two metal pins that can be found on top of the headlight. The headlight assembly can be removed next. Pull out the plugs that are connected to the headlight assembly. Replace the bulbs and then reconnect the assembly.

User Avatar

hit your dome light on/off switch 4 times...it says how to do that in your manual

User Avatar

2006 Chevrolet Suburban daytime running light (DRL) bulb replacement: Purchase the correct replacement daytime running light (DRL) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the daytime running light (DRL) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).

User Avatar

where is the daytime running light relay located on a 2002 chevy cavalier

User Avatar

I have never seen one. If you want them off you have to press on the emergency brake a little.

User Avatar

Daytime running light. Usually mean the daytime running lights have a problem

User Avatar

don't believe they had daytime running lights in 1991 topaz

User Avatar

A ( Daytime Running Light ) module

User Avatar

The daytime running light module on a 2005 F-350 is located underneath the hood. The module will be in the relay box.

User Avatar

Remove the thumbscrews which attach the headlight and turn / running lights. Both have to be removed to access the daytime running light bulb.Type your answer here...

User Avatar

The 98 did not come with daytime running lights. It did in Canada and the module is under the left front fender beside the light.

User Avatar

The daytime running light module on a 1996 Ford Explorer can be found behind the bumper. It is on the driver's side of the car.

User Avatar

Check your owners manual for the location of your daytime running light module. The manual should have a diagram with its exact location.

User Avatar

2001 Chevrolet Suburban daytime running light (DRL) bulb replacement: Purchase the correct replacement daytime running light (DRL) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the daytime running light (DRL) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).

User Avatar

The daytime run lamps are your high beam bulbs with a module that cuts the amount of amperage that just dims the bulbs. Just change high beam bulb.

User Avatar

The daytime running lights are connected to the bright lights. It just reduces the power for the daytime runners.

User Avatar

Yes, Mine went our last year. Had to replace the the 'DRL' (daytime running light) diode located above the stearing column down by the brake pedal. Good Luck DCH

User Avatar

Interesting question - my 2001 SEL does not have daytime running lights, and I'm not aware that Ford offered them.

User Avatar

No. Daytime running light can be disabled without affecting turn signals.

User Avatar

The daytime running light module on a 2000 Dodge Dakota is located underneath the hood. It will be located on the inner fender on the left side.

User Avatar

Well, the daytime running lights are on whenever the car is running and in gear. They're off when you have the headlights on. So, your service light Doesn't come on when the headlights are on?? If you switch the headlights between on and off (with the car running and in gear) does the service light follow?

User Avatar

If the headlight that runs through the modulator first is out then the daytime running lights won't work. Change the bulb and the daytime lights should then work.

User Avatar

The daytime running light module is located behind the front driver's side fender below the turn signal. It is easy to see from below.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.