0
look at your belt and pulleys, you will see a wheel below the Power Steering pump, it is the tensioner, use a 14 mm socket, put it on the bolt head as if you were going to tighten the bolt, that releases the tension on the belt so you can remove it. Make sure you pay attention to how it goes, I took pics with my phone just in case but did'nt need it, it's pretty easy.
What else can I help you with?
How do you replace a fan belt on a Chevy blazer 4 x 4 need diagram?
how to change the fan belt on a 1995 Chevy blazer vortec motor?
How do you change a fan belt on 2003 Geo Tracker?
To change the fan belt on a 2003 Geo Tracker, first, disconnect the negative battery terminal for safety. Then, locate the belt tensioner and use a wrench to relieve tension on the belt. Remove the old belt from the pulleys and install the new belt, ensuring it follows the correct routing. Finally, release the tensioner to tighten the belt and reconnect the battery terminal.
How do you change a serpentine belt on a 1994 Chevy Blazer?
follow the instructions on the fan shroud
How do you change the fan belt on a 97 geo tracker?
Loosen the component slide it towards the engine to lossen the belt, remove belt. Install in reverse. If the fan is your problem it is held on with 4 small bolts, remove them and the fan. P/S you should be able to work the belt around the fan blades without removing the fan. On_mitch
How do you change the fan belt on a 1997 Chevy cavalier?
i will find out 4 u my dads a mechanic
Installing fan belt on 1992 Chevy k1 blazer?
Put your new fan belt around the pulleys of your 1992 Chevy Blazer. Tighten the fan belt with the tensioner pulley.
How do you install the fan belt on a 1993 Chevy S10?
how do you replace fan belt on 95 Chevy S-10 2.2 engine
How do you replace the serpentine fan belt on a Chevy Tracker?
First make a Diagram of how the belt goes around the Pulleys. Get a 14mm socket and or wrench ( I used a breaker Bar) Find the Tension Pulley, on my 1999 tracker it was silver and faceing the engine on my left next to the Fan Belt pulley. Turn the nut toward tighten ( clockwise) and it will move down taking tension off the pulley. Then work the old belt off an up around the fan blade to remove. Put new belt back on the way you took the old belt off.
How do you change the fan belt on your peugeot 406?
how do you change a fan belt on a 406
A picture of fan belt assembly for 98 Chevy Venture?
a picture of how to assemble a fan belt fro 98 Chevy venture van
How do you change a 2002 suzuki grand vitara fan belt?
how to change fan belt
How do you change a fan belt for a 2000 Toyota Avalon?
How do you change a fan belt for a 2000 Toyota Avalon
