Want this question answered?
Really? Unclip the cover and remove the old filter. It's easy.
The filter is located behind the RH side of the carbon canister under the hood.
A screwdriver and a 10mm socket wrench.
A Villager, like most cars, has only one fuel filter.
The Villager does not have a test port. You need to tee into the line at the fuel filter.
The fuel filter is located under the hood on the drivers side beneath the master cylinder
Under the vehicle, approximately in the middle, driver's side.
The Villager does not have a test port, you need to tee into the line near the fuel filter to test pressure.
According to fordparts.com : For a 1995 Mercury Villager : Engine oil filter ( Motorcraft FL - 839 ) Engine air filter ( Motorcraft FA - 1121 ) Engine fuel filter ( Motorcraft FG - 978 )
Under the vehicle roughly in the middle, driver's side.
About 18 inches behind the coolant tank that sits next to your battery.
You'll need to install a tee into the line by the fuel filter to check it, there is no shrader valve.