Ford Ranger
Ford Ranger XL
Ford Ranger XLT

How do you change a fuel pump on a 1997 Ford Ranger?

343536

Top Answer
User Avatar
Wiki User
2013-10-09 04:57:28
2013-10-09 04:57:28

go to autozone.com and you can yse the online repair manuals and print out step by step instructions to replace the fuel pump

AnswerDrain the fuel tank, disconnect the fuel tank straps, disconnect the hoses and electrical connector from the fuel pump, use a spanner wrench to loosen the nut securing the pump to the tank. Installation is reversal of removal. Now here is a better idea, cut a hole in the bed of the truck and remove it that way and/or reove the bed of the truck and slide it away from the tank. Your choice!

Better answer

The best way to change the fuel pump is to take the bed off the truck, it is very simple. You have 6- T-55 screws in your bed remove them. Disconnect the filler hose, it is 3- screws forgot the size. Its a small metric. Remove to gas cap, and take the tail lights out and bulbs. Extremelely easy, its really hard to get the tanks back into place even without fuel. You would need atleast two people to replace it. But all the tool you need is a t-55 hex, i believe a 8m socket and a Phillips screwdriver.

***** ^ is the best answer, but to clarify, the filler neck bolts are 7mm, and all you need to do is unplug the tail light assemble harness located under the rear bumper and the lenses and bulbs can be moved with the box.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The 1997 Ford Ranger engines are fuel injected , so no carburetor

User Avatar

how do you change a fuel filter and were is it located on a 2000 xlt ford ranger

User Avatar

where is the fuel filter located on 96 ford ranger supercab

User Avatar

The electric fuel pump is inside the fuel tank

User Avatar

Does it turn over? Does it have fuel/spark/compression?

User Avatar

Either change fuel filter or fuel pump...

User Avatar

Your fuel lines have fitting that can be taken off with simple disconnects from Autozone. Tell them you need Ford fuel line disconnects. Just clamp the disconnect on and pull the line off and change the filter. Someone at AZ will tell you how. -bronomudder89

User Avatar

where is fuel filter located on a 1992 ford ranger

User Avatar

fuel relay switch on 2004 ford ranger 4.0

User Avatar

Yes , the 1994 Ford Ranger has fuel injected engines

User Avatar

Yes , a 1991 Ford Ranger has engines that are fuel injected

User Avatar

According to the 1997 Ford Ranger owners manual : ( The SuperCab model has a 20.5 U.S. gallon / 77.6 litre fuel tank )

User Avatar

where is the fuel filter located on a 1990 ford ranger 2.3 L engine

User Avatar

the fuel pump is located inside the gas tank of my 93 ford ranger

User Avatar

where is fuel pump relay switch on 2003 ford ranger

User Avatar

Drop the fuel tank or remove the bed.

User Avatar

A 1992 Ford Ranger is fuel injected so it would have an ELECTRIC fuel pump

User Avatar

It's under the drivers side door, by the front axle

User Avatar

In the front passenger footwell by the kick panel

User Avatar

what does a fuel pump look like in a 1989 ford ranger 4 cyl.

User Avatar

On a 2000 Ford Ranger : The electric fuel pump is INSIDE the fuel tank It is installed through an access hole on top of the fuel tank

User Avatar

On a 1999 Ford Ranger : The electric fuel pump is INSIDE the fuel tank It is installed through an access hole on the top of the fuel tank

User Avatar

On a 2003 Ford Ranger : The ELECTRIC fuel pump is INSIDE the fuel tank It is installed through an opening on the top of the tank


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.