The water from your 1989 Chevrolet Cavalier cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
The 1989 Chevy Cavalier could be either a 2.0L 4-cylinder or a 2.8L V-6.
No it does not.
need to know which engine you have
How do you change the heater core on a 1989 Oldsmobile Cutlass Ciera? or where can I get the Info on replaceing it
Make sure the 1989 Chevrolet Cavalier horn fuse is in working condition. Make sure the positive and ground wires on the horn are tight and free of corrosion.
The 1989 Chevrolet heater core can be found behind the kick plate. You will need to remove the passenger side kick plate in order to access the heater core.
Would have been built for R12, can be converted to R134a.
where do I find it
The firing order for a 1989 Chevrolet Cavalier is 1, 3, 4, 2. This is for a 2.2 Liter engine.
Check the heater core in the 1989 Cavalier for leaks, as this is a common place. If the core is ok, then spray the vehicle at a car wash around all windows to find the source of the leak.
Heater core has air in it and or plugging up.
Speed Sensor is not working
1-6-5-4-3-2- good luck ....chevy boy
89 Buick park ave install a heater coil
The 1989 Chevrolet Cavalier fuse panel can be found beneath the drivers side dashboard. The fuse panel will be located at the far left of the dashboard.
If memory serves me right, you press in on the collar at the cylinder and hold it in while you pull on the line.
THE FIRING ORDER FOR A 2.8 V6 88 CAVALIER IS 1,2,3,4,5,6, THE COIL PACKS ARE 1-4 6-3 2-5
Inside the car, passenger side, mounted near the firewall. ok theres heater coil the heater core is under the center of the dash under a acess pannel do not but one form auto zone has 3 leak on me go to the dealer
Chevrolet Lumina was created in 1989.