If you need 2 ask how 2 change ur intake manifold gasket, u shouldn't be doing it urself, get some1 who knows what their doing! But if you really want 2 know (i don't own a grand prix i own a grand am) but ur probably gonna have 2 take off the throtlebody to change ur intake manifold gasket, which if you mess up in taking off and putting back on ur throtlebody its called - at the least ur car won't run at all or it will have a major gas leak, or u'll blow urself and ur car up! So i'd recommend that u don't do it urself.
jaguar 2001 Lower Engine Intake Manifold Gasket
5 to 7 depending on experience.
The 1999 Pontiac cylinder head gasket bolt torque specification is 160 pounds. The intake manifold bolt torque specification is 90 pounds.
Pretty straight forward. You must remove the intake manifold in order to replace the gasket.
Remove the intake manifold retaining bolts on your 2003 Chevrolet Malibu. The manifold will come off. Remove the manifold gasket and clean the surface. Put the new manifold gasket on and reverse the process.
What engine? and ensure it is a bad gasket, not an intake plentum.
how to replace a distributor gasket on a 2000 Pontiac grand am 3.4l
The intake gasket is the gasket that conncects from your air filter into your intake manifold
Yes, you must install a new intake manifold gasket.
there is no upper intake gasket, only a front and rear
Irratic idling condition is indication of intake/inlet manifold gasket leak. Change gasket immediately. This particularly applies to EFI engines. Newaz.
Remove the 1995 Oldsmobile Cutlass intake manifold retaining bolts. The manifold will come off. Remove the old gasket. Clean the surface. Put the new intake gasket and tighten the intake manifold retaining bolts.
between the head and intake manifold
Between the intake manifold and the cylinder head.
by the lower intake manifold while you are doing this you should replace the intake manifold gasket anyway because it will leak sooner or later.
There are a few causes: Damaged or disconnected hoses (or component) from intake manifold. Worn out intake manifold gasket. Improper replacement of a part. Cracked or damaged intake manifold.
Remove the exhaust pipe from the exhaust manifold. Remove the manifold bolts. Remove the manifold. Remove the manifold gasket and clean the surface. Reverse the process to install the new manifold gasket.
Remove the retaining bolts from your 2001 Mitsubishi Eclipse manifold. The manifold will come off. Remove the manifold gasket. Clean the surface and put the new manifold gasket on.
take it to a mechanic
No absolutely not...
Assuming this is a 4.3L engine, the upper intake manifold gasket would be between the upper intake manifold and the lower intake manifold.
Yes, change both of them.
I have a 2002 Pontiac Gramd Am and its in the shop right now getting the Intake Manifold Gasket fixed on it! Its about $2000 with labor costs and everything! Rediculous! Its supposidly VERY common in these vehicles....They should do a re-call!