Want this question answered?
with a barrel lock key
Push the spring and pull the cylinder out
you might need to change the battery
how do i change locks on lt35 due to key snapped in barrell
the key needs to be in the barrel and turned until the two small square pegs on the underside of the barrel casing can be pushed into the barrel .allowing the barrel to be pulled out i just did this on my farthers car and i believe there should be two screws securing the barrel aswell but they were missing hope this is of help to you
Pay your bills and it will never have a barrel put on it!
I assume you are referring to the lock barrel... Remove the inside trim panel from the door Reach inside the door and find the back of the door lock barrel, you will feel a metal clip on the opposite side of the barrel to the edge of the door (ie. on the windscreen side of the lock). Simply pull the clip towards the windscreen until it comes off (you will have to pull fairly hard), then you can withdraw the lock from the outside of the car. To put it back, slip the lock back through the door from outside, then slide the spring clip back to hold the barrel in place.
prise the panel off from the boot lid,all then is accesable,could you please tell me where you bought a replacement lock barrel?cant find one anywhere e=mail pabb_c@hotmail.com
The linkage is not connected to the door lock barrel. You will need to remove the inside door panel. Connect the linkage to the door lock barrel.
Fuse 15
See Q: How do you remove Steering wheel lock VW golf mk2?
Lock is voiced by Paul Reubens , Shock by Catherine O'Hara and Barrel by Danny Elfman .