On motorscooters made in China with a cy6 drive (CVT system) it is an easy but time consuming job. First put the scooter on the center stand and keep the front tire on the floor so you will have no weight on the rear tire. Usually the scooter will be balanced this way so this is an easy thing to do. Begin by removing the muffler and its supporting brackets. Then remove the right rear shock from the control arm bracket. Remove the right side control arm bracket and then remove the wheel from the cy6 drive unit. Then simply change the tire and reverse proceedure to reassembly.
Change rear tire on c-3 yamaha scotter
The Fusion Asphalt Scooter is 34 inches long from the front of the front tire to the back of the rear tire.
All u have to do is. Just cut like parts of the tire and just screw it to the scooter and color it however you want it.
stop and change it!
with the motorcycle on the ground install tire change tool from tool kit across the tabs on the frame then put motorcycle on center stand. Remove rear fender bolts to raise rear fender, remove axle bolt then remove rear tire.
To inform
how to remove a tire on 04 mazda3 bolts are off and tire wont come off
You don't.
You jack the rear end up, and remove the nuts holding the wheel.
Lift the rear of the motorcycle, use a tire iron to loosen and remove lug nuts, and remove old tire. Now, put in the new tire, replace the lug nuts and tighten, lower the motorcycle to the ground.
Yes and so will a tire and/or rim change. To correct the problem you will need to reprogram the ECU to compensate for the new rear-end.
The fuel filter is behind the right rear tire. To access you need to remove the right rear back tire. If you plan to change the fuel filter it is a good idea to disconnect the fuel filter relay and start motor until it stalls. Also, disconnect battery prior to fuel filter removal.