Change rear tire on c-3 yamaha scotter
with the motorcycle on the ground install tire change tool from tool kit across the tabs on the frame then put motorcycle on center stand. Remove rear fender bolts to raise rear fender, remove axle bolt then remove rear tire.
The Fusion Asphalt Scooter is 34 inches long from the front of the front tire to the back of the rear tire.
15psi for the front and rear tire mate
22x10x9
On motorscooters made in China with a cy6 drive (CVT system) it is an easy but time consuming job. First put the scooter on the center stand and keep the front tire on the floor so you will have no weight on the rear tire. Usually the scooter will be balanced this way so this is an easy thing to do. Begin by removing the muffler and its supporting brackets. Then remove the right rear shock from the control arm bracket. Remove the right side control arm bracket and then remove the wheel from the cy6 drive unit. Then simply change the tire and reverse proceedure to reassembly.
The tires on a 1984 Yamaha Virago XV1000 are 100/90-19 for the front tire. The rear tire should be 140/90-15.
The V.I.N. or VIN serial number on a Yamaha Rhino Is located on the left hand, Rear Frame behind The Left Rear Tire.
30psi in the front 35psi in the rear
front 25psi rear 29psi
All u have to do is. Just cut like parts of the tire and just screw it to the scooter and color it however you want it.
Manufacturer recommends 36 front 42 rear
Front: 36psi; Rear: 38psi