Want this question answered?
how to changr pick up coil 88 vandura
Usually, NO.
if the coil is on the distributor cap,remove cover then disconnect wires from the coil and remove coil. if coil is on engine then loosen the bolt and remove from coil mount
you must remove the distributor, disassemble unit and replace pick up coil
Remove Distributor,remove drive gear,remove shaft,remove pickup coil.
ITS the PICK-up COIL !!!!!!! to be safe just change the distibutor
The pick up coil for this engine should be right underneath the rotor inside the distributor cap. Unscrew the two screws holding the cap on, remove the rotor below it, then you should be able to lift out the pick up coil. I don't recall anything additional used to attach it, just the distributor cap screws.
Ignition coils are generally external while pick up coils are generally internal to distributor
Two Pick-Ups In One Did you know:A humbucking pick-up is a pick-up that has 2 single coil pick-ups put together.
Rotor Pick-up coil
In the distributor.
96 gmc does not have a pick up coil but the coil is monted to the intake removed by two bolts pick up is in the dis. removed by pulling the dis. then by taking a part