Change one wire at a time. Take the wire from the distributor then the spark plug end, replace with wire of same length. As you do this compare wire lengths and you will be able to change them without any trouble. BE SURE THE SPARK PLUG END BOTTOMS WHEN YOU INSTALL IT OR YOU WILL GET A MISS IN THE FIRING.
I need a lot more information. I don't know what you mean by four wire plug. What does it look like, what was it used for? What three wire plug are you installing, what does it look like, what is it used for. What color ore the wires?
You can change the spark plugs on the 1997 Toyota Tacoma yourself. Remove the ground wire and spark plug wire. Remove plug. Replace the plug with a plug made specially for your model car.
You won't need a diagram if you change one spark plug wire at a time.
Change one plug at a time. Start by removing the "boot" covering the spark plug. Leave wire connected on other end. Use ratchet with "spark plug" attachment. Remove old plug, insert new plug. Attach new wire. Follow old wire to the correct connection. Remove old wire. Connect new wire. Continue until all plugs and wires are changed.
YES IT HAS A PLUG
Change the spark plug and spark plug wire. Change the fuel filter. Change the air filter. Change the motor oil.
whichever spark plug or wire you change, that your problem...its the connector on the plug wire..broken, bended or cracked... treyville
Change the cord/plug on the stove to a four wire cord/plug. When installing the new plug remove the grounding strip that connects the center lug in the stove wiring block to the frame of the stove. Connect the white wire from the new plug to the center lug. Connect the green wire from the plug to the stove frame.
Change the wire, or coil plug
Spark Plug Wires? Remove them 1 at a time from the spark plug to the distributor or the ION pack, remove and replace the spark plug, add the new spark plug wire from the newly added spark plug to the distributor or ION pack.
Changing the spark plug wires in your 1999 Mercedes-Benz is quite simple. The spark plug wires simply lift off. The new spark plug wires can be pushed onto the spark plug. It is best to change one wire at a time.
there is no cap it has a coil for each plug wire on the motor remove one wire at a time and replace it