Should be located in a removable housing at the engine end of the upper radiator hose Drain about 1 gallon of coolant from the radiator Remove this housing Note how thermostat is installed Clean both surfaces Replace thermostat and gasket Re-install housing Re-fill coolant slowly to prevent an airlock Start engine and look for leaks Run engine to normal operating temperature with heater on Re-check coolant level
How do you change the thermostat in 1999 Mercury Villager
where is the thermostat on a 1999 mazda protege?
The spring always faces into the engine.
how do you change a thermostat for a 1997 Ford Contour
I hope this question is about the engine coolant thermostat. If it is and you have to ask this, you shouldn't be allowed near a vehicle with a tool.
there is no such thing as a 1999 impala
The thermostat is under the housing that the top radiator hose connects to, remove the hose then the housing and change the thermostat. The bolts are metric so be prepared with the proper tools.
The thermostat could be stuck open.
Thermostat is the whole water outlet on the waterpump.
thermostst
hey, take that thermostat and shove it up your butt
why