0
How do you change a valve flap in a toilet or make it hold the water in the tank better?
Wiki User
∙ 13y ago
On most toilets, the flapper hooks over two hooks at the bottom of the overflow tube. On some older toilets, the flapper will attach with a ring that slides over the over flow tube. A new flapper usually has both options. If you use the hooks just cut the center ring off of the new flapper.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you change angle valve for toilet?
Shut off valve at the wall? Turn the main water line off and change it. How you change it would depend on what type it is and how it attaches to the pipe.
How do you replace the toilet shut off valve?
Shut the water off at the main shut off where it comes into the house or at the meter and change the valve at the fixture. The valve at the fixture may be sweated on, compression, or threaded.
How do you stop a toilet tank condensation?
Install a tempering valve in water line feeding toilet. Tempering valve will mix hot and cold water together so warm water fills toilet tank which will stop condensation.
What if your toilet makes a noise out of no were?
Your ballcock is comming on -- replace tank ball or sometimes you have to change out flush valve -- but change tank ball first and see if that will do it You hardly ever have to change flush valve -- Your ballcock is what lets water come into your tank
How do you turn off the water to the toilet?
shutting off the valve
How do I get the toilet to stop making the shower water hotter?
One of the easiest and least expensive fixes for this problem is to adjust the flow of water into the toilet. If the toilet fills more slowly, it will not alter the water pressure enough to change the temperature of the shower. Another possible solution, which would require the purchase of a special valve and possibly installation by a plumber, is to install a thermostat-controlled water valve in the shower to keep the water flow at a constant temperature.
How do you replace a flush valve in a toilet?
Have the new valve in hand. Cut the toilet water supply off at the commode, or even at the street meter box.Remove water tube or pipe supply and old flush valve. Install new valve and new supply line if required.
Can a running toilet effect the hot water heater?
Usually not. If toilet has a mixing valve going to it so warm water fills toilet tank and toilet runs constantly, then enough warm water could leak out through toilet to possibly have an effect on water heater.
Is the water closet for cold water only?
No, you can install mixing valve that will give you tempered water to toilet.
Where is the flush valve of a toilet?
The water supply line attaches to it on the bottom of the tank. The actual valve is at the top of this tube.
How do you replace the refill valve in toilet resivoir?
Refill valve is a very important component in your toilet since it fills the tank of the toilet after every flush. This valve uses a float to turn the water on and off. This is a plumber related work, only a professional plumber can repair it. alliedallcityinc.com
How do you stop the toilet tank from filling with water?
There should be shut off valve called an angle stop towards the floor on the left side of your toilet. If you shut this valve by turning it clockwise this will stop the feed of water to the tank of your toilet.A:Your float valve may be defective or worn out
