94 Dodge ram b250 van water pump removal...real simple. disconnect lower and upper radiator hoses...take lower off water pump put to side as with upper. unbolt fan shield..two piece. disconnect transmission line from radiator and lower hose and pull lower shield down and out. Take a screwdriver and wedge it in between two of the four bolts on the fan and use a wrench (1 inch) and take off the fan/clutch..lift out from top. remove four bolts holding pulley and remove pulley. Disconnect hose on top of water pump and hose on side of water pump. Remove drivebelt. Unbolt water pump. Check that the hose on top of water pump isn't damaged. Access to this hose requires removal of air compressor and bracket since hose sits under AC compressor. the compressor can just be moved aside and the bracket needs to come out.
It is not required, but is a good idea.
No, you do not have to replace the timing belt at the same time as the water pump. It is highly recommended because there is no additional labor involved since the timing belt must be removed to replace the water pump.
How much the cost if u buy a fuel pump dodge caravan 2001 model....
Drop the pan and unbolt it.
How do I change a water pump on 1998 dodge ram v10 2500. I need a picture to
how do i change a water pump in a 1991 dodge shadow with a 2.2 liter does it require an internal water pump
Yes
The fuel pump is in the tank and yes you have to drop the tank out to get it out.
it is in with the timing belt
It is the item below the ac compressor.
take it to a mechanic.
my 93 with a 2.5 uses 3 bolts to hold pulley on the pump