0
I am no ASE service tech, but do read and worked on my cars and others during college to pay for education.
The wheel sensoe is part of the wheel housing and is called the wheel hu. This housing has the wheel bearing/abs sensor and connector as one unit that is changed as a whole unit. This can be found on ebay for $35 and no shipping. I have a 03 and it is great and I work on it myself.
Now for the change out, car needs to be jacked and supported as you would when changing the tire. Make sure you support it with jack stands or the like for safety, as the wheel has to come off. Next with the wheel off, look on the back side of where the wheel studs are and you can see or feel 3 bolts holding this housing on to the strut assembly. This what holds the assembly on the strut and please note that the axle nut has to come off so that this assembly can slide off the axle end.
Install in the reverse and a helpful note, purchase a Haynes repair book and review it before attempting this task and to give you an idea of how it works.
Good luck
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you replace a speed sensor on a 2004 Acura TL?
Need to know if you are asking about the vehicle speed sensor, a front wheel speed sensor or rear wheel speed sensor.
How do you change the speed sensor on 2001 Escape XLT?
If it is the rear sensor, it will be in the differential. If it is a front sensor, it will be located at each front wheel.
How do you change the speed sensor in a 2000 Ford F-150?
There is more than one speed sensor. There is one in the top of the differential housing. If you have a 4R70W transmission, there is a speed sensor in the side of it, and if you have a 4R100 transmission there are two speed sensors in it. If you have 4 wheel ant-lock brakes, there is a speed sensor in each front wheel hub. So there could be as many as 5 speed sensors. Which speed sensor are we replacing?
Where is the speed sensor on a 2004 Chrysler sebring touring edition?
There are two speed sensors on the front of the transmission and one abs wheel speed sensor at each wheel bearing.There are two speed sensors on the front of the transmission and one abs wheel speed sensor at each wheel bearing.
Where is the wheel speed sensor located?
Wheel speed or ABS sensor's are located on the suspension Knuckle Front and Rear.
Where is the vehicle speed sensor located on a 99 ram?
The vehicle speed sensor is the sensor on top of the rear axle. If the vehicle has 4 wheel ABS then there will be a speed sensor on each front wheel.
Where wheel speed sensor on an olds intrigue?
there is none. the speed sensor is in the tranny
What is a wheel speed sensor?
It is a sensor that monitors wheel speed and sends that info to the abs module and/or the traction control module.
How do you change a rear wheel bearing on a 2000 Pontiac Montana?
You need to replace the rear wheel hub - bearing and speed sensor inclusive
What does a speed sensor control?
A Vehicle Speed Sensor (VSS) senses the speed of the vehicle. Used for automatic transmission shift points and other electronics. Another speed sensor would be a wheel speed sensor. This one monitors wheel speed for ABS and Traction control.
Change the ABS sensor on a 2002 Chevy trailerblazer?
Remove the wheel, caliper, and rotor (you may also have to remove the wheel bearings depending on the specific model). The wheel speed sensor is attached to the end of the wire facing the wheel hub.
Are there more than one speed sensor on a 2003 trailblazer?
There is a vehicle speed sensor (VSS) and 4 ABS wheel speed sensors, one at each wheel.
