That all depends on if the pulley was factory press-fit or bolted on to the compressor shaft. if its pressed on you may be able to use a pulley extractor kit (from an auto parts store in the tools section - around $20). Some press fitted pulleys simply can't be removed, however, and you'll have to replace the entire unit.
If the pulley is a bolt on type, the bolt is usually a flush mounted Allen bolt near the base of the pulley shaft - simply unscrew the bolt and remove the pulley. You may still need the extractor if the pulley is hard to remove, though.
No.
Yes
Will a 1992 Dakota truck motor fit into a dodge truck 1999 Dakota?"
No they won't. They completely changed the Dakota bed in 1997
A 1999 Dodge Dakota does not have an inertia switch. The fuel system is computer controlled with relays.
The starter solenoid on a Dodge Dakota is built on the starter.
A 1999 Dakota does not have a mass airflow sensor.A 1999 Dakota does not have a mass airflow sensor.
Yes
No
{| ! ! ! ! ! | |}
No.No.
There are a few things that can cause a 1999 Dodge Dakota to sputter. For example, the battery may be malfunctioning or the park plugs can be going bad.