Remove 2 bolts. LOL mine is located on the throttle body
How do you change the ignition control module in a 1988 Chevy Silverado 5.7L
Remove the wiring harness from your 1995 Chevy Blazer ignition control module. Remove the ignition control module retaining screws. Reverse the process to install your new ignition control module.
there is no ignition control module on the 1996 model its all through the PCM
Disconnect the battery. Remove the ignition coils. Remove the ignition control module that was under the coils, and replace it.
Which engine does your car have?
To change the ignition control module on a 1995 Monte Carlo Z34, first disconnect the battery to ensure safety. Then, locate the ignition control module, which is typically mounted on or near the ignition coil. Remove any wiring harness connectors and unscrew the module from its mount. Install the new module by reversing the removal process, ensuring all connections are secure before reconnecting the battery.
You can find the Ford Focus ignition control module beneath the drivers side dashboard. The ignition control module will be above the accelerator pedal.
The ignition control module sit directly below the distributor.
Where is the ignition control module located in my 1992 Crown Victoria
ignition control module is under the distributor cap
Where is ignition control module on a 2001 mercury sable
The 1990 Chevy Celebrity engine is distributorless, the ignition is handled by a combination of the engine control module(computer) and the ignition control module. You did not mention which engine the car has. If your car has the 4 cylinder engine the ignition control module is below the intake manifold at the rear of the engine. You can follow the spark plug wires to it. The coils are mounted to the ignition control module. If your car has the V6 the ignition control module is near the starter and again you can follow the spark plug wires to it. Again the coils are mounted to the ignition control module.