1. Remove the drain plug and drain the oil.
2. Remove the air bleed screw, oil filter cover bolts, and filter element.
3. Reinstall the drain plug (make sure it's tight).
4. Install the new oil filter element, new O-ring (make sure the O-rings are positioned properly), and filter cover. Tighten the oil filter bolt.
5. Add 2.5 L of engine oil (10W30 for cold weather, 20W40 for warm) through the oil filter. Reinstall the oil filler cap.
6. After replacement of engine oil and/or oil filter, be sure to check for the oil level and for any oil leakage. The oil level indicator light should go off after the oil is filled.
The valve clearance for the 1983 Yamaha Virago 500 is 7.2 mm. The exhaust valve lift is 7.7 mm. The vehicle gets on average 51 miles per gallon.Ê
i need to find out how to set the timing on a Yamaha xt 500
Change the oil/filter after each race of if you do not race change the oil/filter every 1,000 km/625 miles. If you ride in very dusty conditions change the oil/filter every 500 km/300 miles. Use SAE 10w30 synthetic oil. Your engine also requires that you use at least 95 octane premium fuel. If you want an owners manual click the link and download it for free.
You change the ENGINE oil and filter. There is no transmission oil.
Engine oil - 2.9 quarts without filter change, 3.59 quarts with filter change.
One can buy Yamaha dgx 500 from a dealer and directly from internet sites such as ebay , amazon , but the simple way is to google it with words buy yamaha dgx 500
2 quarts with filter change
Yamaha raptor 700 definetly
10 oz of 10w fork oil in each leg
ive got a 1999 Yamaha phazer 500 and it does 120 km
Approximately 2 quarts of oil are needed to change the oil of a Polaris Outlaw 500 ATV. Slightly more oil is needed if the filter is changed.
500 Euro