Want this question answered?
how to remove 2004 scion back seat
In a 06 scion xb after mounting new rear brake shoes the wheel cylinder will not compress to alow the drum to go back on. Am I missing some procedure.
Hello, all you have to do is turn the back of the light post and pill the lights out for both the fog lamps and the break lights. For the break lights, its less work to change.
Bulbs may be burnt out.
Two lights from the front two at the back. i wish i could change that but there you go
I unbolted the cover on the wheel well and reached in to change my signal lights. Then I bolted it back on. I hope this works.
Well, from what i understand of your question i think you are askign how to change front brake lights and corner lights. These are headlights and corner lights, brake lights are located at the rear of the car. Pop the hoos, you should see the wiring that hooks up to the lights. Unscrew the plastic"shield" that protects the bulb and change the bulb place it back in and screw the light back into place. (i recommend checkign to make sure the light bulb works before putting it back in the whole light) Good Luck.
Usually through the back panel in the trunk
The best place to look would be a Scion dealership. Since this is a model from several years back, the next option is probably used-car dealerships, although "retailers" isn't exactly the right word to describe those.
You can remove the panel inside the back of the car. From there you can access your tail lights and your tag lights.
you need to change the low beam relay. it is overheating which turns lights off. when it has cooled the lights will come back on. this relay is in the fuse box and they are not expensive to buy.easy to change as a fuse
never done a tercel before, but generally the back lights and brake lights are reached by going into the trunk or hatcback. you may have to pull back some lining to reach the lights