You will find a single idler pully with a single bolt through it, undo this bolt, turn to the left, put your new belt on and re-install your belt. I believe you can adjust tension by moving the nuts and bolts on your powersteering pump bracket assembly.
Ryan
Yes.
remove old belt install new belt you're welcome
NO belt in the 302cid engine of a 1988 Mercury Grand Marquis. it is a chain with gears
180 to 200lbs
i need to know what bolts to losen so i can change water pump belt on 1988 Nissan patherfinder
That vehicle with the V-6 or the V-8 doesn't have a timing belt.
There is no timing belt on 2.5L Fieros, the cam is gear driven.
it is adjusted throught the power steering pump loosen the adjuster bolts remove belt and reverse
90,000 miles. 144,000 km
Timing belt replacement on 88 mighty max
Belt is worn out, or the idler pulley is defective. Replace the belt and inspect the idler puley.
Loosen the tensioner pulley on your 1988 Chevrolet Corsica. When the tensioner pulley is loose the serpentine belt will easily come off. Put the new serpentine belt on and tighten the tensioner pulley.