The blend door actuator on late model Dodge Durango and small pickup can be accessed by removing the glove box. There is a very common problem with blend door failure in these vehicles, and dash removal is required to perform the repair. A cheap and easy DIY fix for this can also be found at heatertreater. They also make a heater core regulator which bypasses the blend door and can remedy the situation with no dash removal.
Its located on the left side of the evaporator housing inside the truck behind the heater core shield...................
You should change the oil in a Dodge Dakota every 3000 miles.
Blend door actuator.
howdo you change the front axel of a dodge Dakota 2000 4x4
It is in the center of the HVAC housing, under the dash.
Remove the inside door panel. Remove the linkage from the actuator. Remove the retaining nut from the actuator. Reverse the process to install the new actuator.
An actuator for what.
Yes
turn the dial and see if something happens
A Dodge Dakota with a 4.7 takes 6 quarts with a filter change
belt diagram 1992 dodge Dakota with 318
Check the CAD, the diaphragm may be toast. just replace.