Take off the brake caliper, and then take off the caliper mounting bracket. The rotor should slip right off. If it doesnt, check to see if it is pressed or bolted onto the hub. If it isnt, a few good hits with a hammer on the center of the rotor should break it loose.
Changing brake rotors is pretty easy. One lifts the car, removes the tired, brake shoe and then the brake rotor. Next replace the brake rotor, put the brake shoe and tire back on the car and lower it back to the ground.
yes
take it to a qualified dodge mechanic
How to Install Front Brake Pads Check Related links below.
tools you need for job
Jack up and safely support front of vehicle. Remove front wheels. Remove front brake calipers and hang them with wire so not to damage brake hoses. Remove brake caliper brackets. Remove brake rotors. Rotors may need a little persuasion with a large hammer as they may be stuck/rusted in place. Reverse order to install rotors.
700R4
to remove front rotors you need to remove wheel. then remove 4x4 locking hub.remove brake caliper. next you need a special socket to fit the axle nut.remove this and the outer bearing.then slide rotor off axle making sure not to drop inner bearing.
K is 4x4
NP246
No only should be done when your pads are changed.
you have to take off the hubs and you need crazy hard to find tools