0
How do you change dash bulbs on a 1999 Chevy Suburban - Im referring to the ones behind the stereo?
Wiki User
∙ 16y ago
if your stereo is no longer illuminated, sorry for your luck. these bulbs are inside the radio unit, and are soldered in place, if you are familiar with how to solder, you might be able to disassemble the radio, and replace them, but its probably less frustrating and time consuming to replace the stereo, with a new or aftermarket unit.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you replace the stereo in a Chevrolet Suburban?
What year? Take it to a qualified mechanic
Is stereo masculin or feminin?
In French, "stereo" is masculine. So you would use "un stereo" when referring to it.
Where is the flasher on a 1995 Eagle talon?
Under the dash, behind the stereo. It will be on the right side. Under the dash, behind the stereo. It will be on the right side. Under the dash, behind the stereo. It will be on the right side.
How do you remove the stereo out of a 2004 suburban?
What sequence is used to remove radio from 2004 sububan
Where is the stereo fuse 2003 fiesta?
in the fuse box or behind the stereo itself
Stereo Amplifier Location for a 2002 dodge ram 1500 with infinity stereo?
Behind the glove box
Where is the heater core in a 98 2.2L Sunfire?
in the dash behind a panel behind the stereo
Why does the stereo tick constantly in your 2001 grand am gt?
It is not the stereo. Behind the stereo there is a relay switch for the turn signals. It is going out and needs to be replaced. Autozone has the part about $30-$40
How do you change car sterieos?
To change car stereos, you will need to remove the bezel or cover from the stereo in the vehicle. Then, pull the stereo out of the dashboard and remove the wiring harness. You can then attach the new stereo to the harness.
Where is the horn relay located on your 1985 corvette?
on mine its behind the stereo....
How do you change remove the stereo on a Vauxhall tigra A?
Remove the retaining cover from your stereo. Remove the stereo retaining bolts. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.
How do you change the stereo on a 2000 Chevy Suburban?
Remove the dash trim piece,the one with the plastic that covers all the instrument panel. It snaps on and will pull off. This will expose the screws that secure the radio to the dash. After loosening the radio, the wiring can be disconnected.
