Want this question answered?
you have to remove the cover of the dashboard to replace the light bulbs
Changing the instrument panel lights require removal of the dashboard. With the dashboard removed pull the gauge cluster out and take off the bulbs. Install the new bulbs.
There are four screws. Two at the top and two underneath. Undo these and remove the outer dash case. Underneath ther are three screws holding the clocks in place. Once removed the individual bulbs can be found on the back in plastic holders
To change the light bulb on a Nissan Micra first lift the hood of the car. Find the headlight housings the pull the light bulbs from the ballast. Replace the bulbs.
u must unscrew spedo facia then you will see more screws there is two different sizes of bulbs
This is a tedious job and static electricity can ruin the printed circuit. TAke it to a garage.
Remove ALL dashboard screwscarefuly remove the dashboard,andyou will see were the bulbs are located,replace any/and/or/allthe bulbs needed,and reverse theprocedure to reinstall ! That's it !
The dashboard lights on a 1997 Eagle Talon can be changed by reaching up into the dash to get to the bulbs. Another way is to remove the dashboard screws and remove the front of the instrument panel.
Citroen xsara Picasso dashboard light bulb is the bulb that's for the dashboard light climate control. The you tube web site gives you information as how to change the bulb.
What model of Corolla ? You have to take the dash board out and the bulbs can be removed and replaced from the back. The dashboard on the Corolla is not that difficult to take out, but you have to do it slowly and carefully.
The light assy has to be removed and the bulbs removed from the back.
Begin by removing the instrument panel cover from your 2002 Pontiac Montana. Take hold of the dashboard lightbulb, push in and turn at the same time. The dashboard lightbulb will come out. Reverse the process to install your new dashboard lightbulb.