0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Fork oil capacity for 2002 Yz125?
135mm (80-150)
How do you change front fork seals on a 1989 Honda goldwing?
see http://onmyhonor.com/wing/fork.htm
How do you change the fork seals on a 96 Virago 250?
Remove wheel, fender. Remove Allen bolt at bottom of fork with impact wrench, it usually will not come loose, if you are trying it by hand unless you stick the special tool down into the top of fork tubes. (I use a broom handle), remove dust seals on fork legs, remove circlip, carefully remove oil seals, replace them, and reverse procedure for reassembly, add oil to fork tubes. Bubba
How do you replace fork seals on yz?
Great video showing how.
What is the fork oil capacity of a 2002 ninja 600?
588ml dry or ca 500ml oil change
What is the fork oil capacity of a 1993 Honda shadow?
15.1 - 15.3oz. I just changed out a set of fork seals on mine this weekend.
How do you replace fork seals?
Remoov the old ones and put in new ones
What if your front end bottoms out on your 2007 harley Davidson road king?
Check your fork oil, if it's low or leaking it's probably your seals. If the oil and seals check fine, then the fork shock springs are shot.
How do you change front seals on a 2003 Honda shadow vlx cd600?
Unfortunately, Honda parts usually require special tools. You will need a fork seal driver, which is pretty standard. But you will also need a special driver to remove the bolt at the bottom of the forks. This tool can be made, but it may be better to order the part. Visit a Honda forum for specifics, since every bike is different. Changing fork seals is generally the same. Make sure to use a proper fork seal driver, since slight nicks to new seals can cause the seals to break. In a nutshell: Remove the dust cover, then the clip that holds the seals in place. Pull the forks apart being careful that the spring doesn't force the top fork out too quickly. Drain the oil. The parts of the forks are held together with bolts at the bottom of the forks. That's what the special tool is for. Clean out the forks and return the parts. Pour clean fork oil, drive the seals in place. Replace the clip and dust covers. The amount of fork oil is important. Check the service manual or a Honda forum.
Why do forks leak oil on Honda xr200?
they shouldn't.. you need to replace the fork seals
How much fork oil goes into a harley 2002 softail forks?
How much fork oil goes into a harley 2002 softail forks??
How much fork oil does a 1985 atc 250r take?
How much fluid in the front forks of a 1985 atc 250r take. I am changing the fork seals
