To remove and replace the bearing, you must use an hydraulic press. Since you must remove the housing anyway, just bring it to a local garage and get them to help. (Its a 5 min operation) The bearing can be removed with hand tools in a crisis, but its a little to easy to damage the parts this way (and it takes brute force)
how do you change rear brakes on a 1990 Honda trx 300fwl
it all depends on which wheel bearing you are trying to replace. for your front wheel bearings you have to remove the brakes, and axel. then you have to have a new bearing pressed into the housing. for a rear wheel bearing most of the time you can only purchase a pre packaged hub assembly. to replace that remove the brakes then remove the four bolts located on the rear of the hub assembly and it should come right off.
It is not recommended that you replace the wheel bearings on your Hyundai Accent by yourself. Rather you should take the vehicle to a repair shop or to the dealer where you bought the vehicle for servicing.
quoted $300 for front brake pads, figure I can do no own for less
how to change a spare tire on a hyundai tiburon
how to change out a horn on a 2008 hyundai elantra
you change the brakes,check brakes fluid,bleed the brakes why is hard to stop in a 1988 sliverado?
brakes?
How to change a water pump on a 94 hyundai scoupe?
how do i change the spark plugs on a 2006 hyundai accent
how do i change back brakes on a 1991 toyata corolla
are you talking about the front or back? the back bearings are a non serviceable part, the in order to change the bearings u need to change the hub, the front bearings can be separated, but chances are if you have to change your hub, bearings will have to be changed also, you will damage the bearings trying to remove them and put them back in, so my answer is yes. get the parts yourself from ecstuning.com and you will save alot of money over dealer or most shops.