T30, 2 of them
The headlight assembly on a 2000 Acura Integra is held on using bracket bolts. Prop the hood open and locate the headlights. Unbolt the brackets and remove them. Carefully pry the headlight assembly out to not harm the weatherstripping.
For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.
Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.
on top of headlight assembly, there are 2 tabs to pull up, then pull assembly out.
Open the hood of the engine compartment. Remove the wiring harness from the headlight. Remove the retaining bolts from the headlight assembly. The headlight unit will come out. Reverse the process to install the new headlight.
The easiest way I have found is the remove the whole headlamp assembly. It is only held on by a couple of thumb screws found on top of the headlight assembly once the hood is open.
Locate the rubber housing of the bulb behind the headlight assembly and pull/disconect it. Unscrew all bolts. Lift and pull out the front part of the headlight assembly and replace the bulb making sure the contacts are aligned. Put back and bolt the headlight assembly and plug.
go to back of headlight assembly and twist it out.
on top of headlight assembly are 2 plastic slide pins, pull up on these to release assembly. when putting back on. push in on assembly to put slide pins down to hold assembly in.
To disconnect the wiring connector from the headlight bulb socket on a 2000 Chrysler Voyage, remove the wiring that goes into headlight plastic lock ring. Snap it loose and pull out the bulb socket.
open the hood. in back of headlight assembly there are two metal slides with pull tabs. pull them up then wiggle the headlight assembly. it should fall right out. with it out you can get at the bulbs.