You must 1st take off the shroud that covers the radiator, then take out the 3 screws that hold the headlight assembly in place. Once you have the screws out you can then slide the head lamp out and unscrew the cap that holds the headlight bulb in the housing and gently pull the lamp out. Make sure you do not touch the new build with you bare hands since oil or grease on your fingers will damage the life of the new bulb.
What all do I have to take off to get to the headlights. I just want to change the bulb can anyone help? Its a 1996 LHS.
The headlight bulbs for the Chrysler LHS are inserted in the back of the light housings. There is a twist ring that holds them in, rotate the ring to remove and replace the bulb.
1996-1997 Dodge Intrepid, Chrysler Concorde, Chrysler LHS, Eagle Vision.
A Chrysler LHS does not have an inertia or reset switch.
There are four oxygen sensors on the 1997 Chrysler LHS. 2 before the catalytic converter and 2 after.
NO, Chrysler controls the fuel system with relays.
four
No.
Passenger side is bank one on a LHS.
The 1997 Chrysler LHS takes 24" drivers side and 22" passenger side replacement windshield wiper blades.
.035
Screwed into the heads.