Want this question answered?
How to drill out ignition switch on 1985 ford f150?
I just purchase a f150 that needs a new ignition switch and the man at auto zone gave me directions with pictures and diagrams, I hope this is of some use. Good Luck!
i lost the ignition key anl keyless remote on my for f150 2004 truck
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTEOn column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
Posible relay problem
We are replacing the ignition switch on a 1976 ford F150 Need some help - give us directions
The actual problem is the starter continues to turn after key is turned off and pulled out of ignition.
no. Make sure wiper is in "OFF" position before you turn off your car.
Ignition relay is probably shot. It is in the power distribution block in the motor comprtment.
Because the heads of the screws holding the ignition to the column snap off on application you will need a chisel,flat head screwdriver and hammer to make a groove in the head of the screw and unscrew normally.
where is door jam switch on 2004 f150 xlt located