Youu need to open trunk lid remove the two screws
holding tailight pull out tailight replace bulb very simple
In a 2004 Mitsubishi Lancer replacing the rear light bulb is relatively easy. First remove the plastic cover from the dome light. Unscrew the light bulb and insert the replacement.
See sources and related links below for the 2002 Mitsubishi Lancer headlight bulb info.
peel off carpeting behind the tail light from the trunk. there should be bulb holders- pull out the holder that holds the busted bulb. you can do this by slightly turning it and pulling it out. change the bulb and replace the holder the same way you removed it.
The bulbs are LEDs (light emitting diode). It is a set of bulbs, fused together, you cannot change individual bulb. You can buy a set from any dealer or from the Internet and change it by yourself or you can go to a mechanic.
On the lancer its easy just pop the trunk open find out which lights are out and take the screws out that hold the lights in place and pop the bulb out that isn't working by turning it and replace it.
To change the brake light on a 2007 Mitsubishi Lancer GLX, first, open the trunk and locate the tail light assembly. Remove the screws or clips securing the assembly, then gently pull it out. Twist the bulb socket counterclockwise to release it, replace the old bulb with a new one, and reassemble the tail light by reversing the steps. Test the new brake light to ensure it’s working properly.
With out car make model and year with the location of the bulb this question can not be answered
how do i change front interior light for lexus rx 300 2004 model
its like changing a light bulb and depends on the car model 2007 volkswagen beetle
To change the headlight bulb on a Mitsubishi Lancer, first, open the hood and locate the back of the headlight assembly. Disconnect the power connector by gently pulling it off, then remove the dust cover if present. Unscrew or unclip the old bulb from the socket, being careful not to touch the glass part of the new bulb. Insert the new bulb, secure it in place, reattach the dust cover, and reconnect the power connector before testing the light.
light bulb's
Phone your local Mitsubishi dealer