Want this question answered?
yes but you will need to get new a new seal the bolts on the 04 are longer then the 02 but it will work
Bottom of the oil pan.
on the bottom of the oil pan
Place a drip pan beneath your engine oil pan. Remove the engine oil plug. Allow the old engine oil to drain out. Remove the engine oil filter, by turning it to the left. Fill the oil filter with oil and return it to its original position. Put the oil pan drain plug into its original position and fill the engine with new motor oil.
You have to remove and disassemble the engine to replace the crankshaft.If you mean the crankshaft position sensor, then yes. You access it from underneath. It is just above the oil pan on the back of the block.You have to remove and disassemble the engine to replace the crankshaft.If you mean the crankshaft position sensor, then yes. You access it from underneath. It is just above the oil pan on the back of the block.
How do you change trans. oil in 04 f350? and why does toe keep engageing and stays on
Have to drop the transmission oil pan
It is underneath the car at the rear of the oil pan next to the drain plug.
The oil pan is the point at which oil pools when the engine is turned off, and MOST of the oil drains to that point when the engine is running. The oil pump pumps a stream of oil out of the oil pan into portions of the engine that need lubrication. Since the oil pan is designed to capture oil as it drains out of the engine, the oil pan must be at the lowest part, and as such, the oil pan hangs from the crankcase and is always underneath the crankshaft. To find the oil pan, just find the engine, climb underneath and look for the big part that has a drain plug... that's the oil pan.
Ottoman cruiser Hamidiye was created in 1904-04.
Japanese cruiser Sendai was created on 1924-04-29.
German cruiser Königsberg was created on 1929-04-17.