0
I assume there is not a shut off on the supply side of the line. If you are used to working with gas, you can do it with the line charged, but it is probably best to shut the gas off at the main. If there is not a shut off valve where the flex line connects, I would put one there now. Then it is just a matter of changing the line. Do not use any pipe dope or tape on a gas connection, at least on the flex line. This is a flare fitting and does not require it. The valve to pipe connection is a Plumbing connection and should have dope or tape on the threads.
What else can I help you with?
Where are the orifices in a cook stove?
I want to change orifices on propane to natural gas and don't know where they are located at??They are usually located where the gas line comes into the appliance-you will need a wrench to loosen it.
When was the Ford Flex created?
ford is an American made line of cars, therefore the ford flex was made in America
Is a flex pipe illegal to use on a heating gas range I was told by the Philadelphia Gas Works to replace my flex pipe.?
For the purpose of cleaning behind a stove (great hygiene) one would think a flex pipe would be the thing to have installed. There must be approved flex pipes for use with natural gas in the home. Most travel trailers equipped with propane gas have such flex lines as the rigid line would certainly break over time and rough roads.
How do you get flex points in goal line blitz without buying them?
Refferals
How do you pronounce guibo The drive line flex disc?
"jew bow"
Why is there a coiled brake line on master cylinder?
So the line can flex between the body and the frame/chassis.
Replacing the fuel line for a 1969 super beetle?
There was no 1969 "super beetle" only the standard. And which line are you replacing the hard line or the flex line?
Can you use 265 volt appliance on a 220 volt line?
Using a 265-volt appliance on a 220-volt line can be risky and may damage the appliance, cause a short circuit, or result in a safety hazard. It is recommended to use voltage converters or transformers to ensure safe operation of the appliance.
Run 150 feet natural gas line to garage what size and type of pipe.?
The size of the piping depends on the amount of gas needed for the appliance in the garage. But lets assume that you need to operate a 160,000 Btuh appliance. 1 inch diameter schedule 40 metallic pipe can be used for Natural Gas,@ 1/2 psi pressure, with a specific Gravity of .60 3/8 inch diameter semi-rigid copper tubing can be used for Natural Gas if your delivery pressure is 2 psi and a regulator is installed at the appliance
What is an area with a high number of unpaired electrons with matching fields?
flex line
What happens when you plug 120vac appliance into a 30 amp line?
Most 30 amp home circuits are 240 V. If you try to run a 120 V appliance using 240 V, the appliance will immediately self-destruct.However... if you actually have a 30 amp 120 V line to which you want to plug in your appliance, the only issue would be fire protection. Circuit breakers are in place to prevent too much current from passing through a wire. Wires have the capacity to carry only a specific amount of maximum current. a 10 Ga wire is generally used in homes for a 30 amp circuit. It doesn't matter if it's carrying 120 or 240 V, it still needs to be a 10 AWG conductor.However, you need to make certain that all conductors, outlets and circuit breakers are matched to each other when wiring a home or business.The appliance will only use the amperage that it needs UP TO THE MAXIMUM RATING OF THE CIRCUIT, providing that the VOLTAGEmatches.So the short answer is, just make certain that the line voltage is right for your appliance and that the circuit is rated at a high enough amperage to handle the appliance.
Why do you need to purge a gas line?
Simple, to remove the air so the gas will reach the appliance
